Main features of the AL 600D system
1: Provides the vehicles ECU with 4 different types of emulation to simulate the vehicles lambda sensor
2: Can use the vehicles existing 0-1 volt exhaust lambda probe sensor
3: Can connect to the vehicles 0-5 volt or 0-12 volt TPS sensor (throttle position sensor) if fitted
4: Very easy to use & set-up the vaporizer unit, Lambda system is then self learning
5: Comes with a handheld setup / tester with led that show emissions rich or lean
6: System has built in software & does not require a computer
Ideal if you already have the handheld setup unit
Comes with handset setup unit
Comes with handheld setup unit & 4 wire Lpg lambda exhaust probe sensor
AL820p Advanced Universal Lambda Control System
System & Benifits
1: Advanced microprocessor control to correct the fuel mixture & emissions
2: Immediately responds to engine changes including environment conditions such as temperature, pressure, humidity, etc.
3: During start-up from cold the system uses a pre-mapping configuration (lambda ecologic system) to control the mixture until the vehicles lambda probe reaches normal working temperature, the system then switches to normal lambda control
4: Detects a lambda probe malfunction & defaults back to pre-mapping configuration
5: Lambda ecologic system provides the vehicles ECU with simulated & original lambda exhaust probe sensor emulations, etc.
6: Supports all types of lambda sensors including Ziconia & Titania resistive sensors, etc.
7: Come with a miniature dash control switch with LED fuel level display
8: Vaporizer temperature sensor to set temperature change over as well as rpm changeover, etc.
8: Built-in up to 6 cylinder petrol injector emulator this can be used on 1 to 6 cylinder engines or 8 to 12 cylinder engines with add on extra emulator unit - optional extra
9: Selectable in software Economy --- Normal --- or --- Sports Mode
Contents:
AL820p Advanced Ecu
Stepper Motor unit
Main wiring loom with Fuses & holders
Petrol injector wiring loom --- with optional plug or universal wire type
Miniature dash control switch with built-in fuel level display
Temperature sensor for vaporizer
CD Software & install guides
With or without Programming interface --- see choices below
AL820p system with choice of petrol injector loom
Kit comes with USB interface, add note if you want Serial type instead
Picture shows all 3 looms available
AL820p system with choice of petrol injector loom
Kit Does not come with interface kit
Picture shows all 3 looms available
AL820p system with choice of petrol injector loom
Lambda control Sensor for vehicles that do not have one
Kit comes with USB interface, add note if you want Serial type instead
Picture shows all 3 looms available
Comes with software & install guides, etc.
Comes with software & install guides, etc.
Emissions Setup & Test Meter for (Instant Lpg, Cng or Petrol Mixture Reading)
for setting up LPG, CNG systems correctly, easy & fast also ideal for
Petrol systems, etc....
Excellent & Simple to use hand held or fit in dash, etc... meter is very fast - faster than a rev counter in reading the emissions a must for any Lpg fitter! meter has a 20 Led display giving an instant reading from Lean to Rich & Optimal fuel mixture, etc... Meters can be wired to the vehicles original 0-1 volt lambda exhaust sensors signal wire or used with a universal 0-1 volt lambda sensor for vehicles without a probe, a universal lambda sensor can be fitted in a piece of pipe, etc.. & push in or on to the exhaust outlet, easy to fit & use only 3 wires.
Excellent & Simple to use hand held or fit in dash, etc... meter is very fast - faster than a rev counter in reading the emissions a must for any Lpg fitter! meter has a 20 Led display giving an instant reading from Lean to Rich & Optimal fuel mixture, etc... Meters can be wired to the vehicles original 0-1 volt lambda exhaust sensors signal wire or used with a universal 0-1 volt lambda sensor for vehicles without a probe, a universal lambda sensor can be fitted in a piece of pipe, etc.. & push in or on to the exhaust outlet, easy to fit & use only 3 wires.
Can be connected to an existing 0-1 or 0-800 mv lambda exhaust sensor probe
Comes with a 0-1 volt lambda exhaust sensor probe or can be connected an existing 0-1 or 0-800 mv lambda exhaust sensor probe
Motor is universal can be fitted to other make systems
Motor is universal can be fitted to other make systems
for setting up the AL600D lambda control system
Converts a 0-5 or 5-0 volt lambda exhaust sensor probe signal in to a 0-1 volt signal ideal for use with the Emissions Meter or AL600D lambda system
Universal 3 wire Ziconia lambda exhaust sensor probe 0-1volt / 0-800 m/v has built in heater for faster working time, ideal for Lpg & Petrol comes with fitting nut
